Mazda MBM 40W Mercury Lamp for Coal Mines

In 1938 a major improvement was made in the safety and efficiency of lighting the South Wales coal mines, with the development of this miniature mercury vapour lamp by the British Thomson-Houston Company.

The lighting of mines is especially challenging due to the presence of fire damp, a mixture of flammable gases. This requires strict regulations on the use of electricity to avoid sparks and ignition at switches or poor contacts. A much safer form of lighting was pioneered by distributing power via compressed air, driving a small generator in each light fitting which could be turned on by operating an air valve. At first incandescent lamps were employed, but were not optimal due to their limited output and fragile nature.

The development of this 40W type MBM mercury lamp enabled a major advance in both output and robustness. In a novel arrangement it was electrically ballasted by slightly modifying the windings of the AC generator. Unlike other mercury lamps this model does not contain the usual third auxiliary ignition electrode. The generator produced a 500Hz AC supply and at such high frequency, a capacitive antenna consisting of a few turns of wire around the arc tube proved satisfactory, greatly simplifying lamp construction.

This original lamp employs an ST-shape radio valve bulb, the domed top allowing secure mounting of the inner structure. Later examples adopted a standard ellipsoidal shape outer bulb and a much more resilient arc tube mounting structure. Such lamps were widely used in British coal mines until the 1990s, when they were made obsolete by more efficient fluorescent lamps in special explosion-proof luminaires.
Manufacturer: The British Thomson-Houston Co. Ltd.
Lamp Power: 40 Watts
Lamp Current: 0.59 - 0.45 Amps
Lamp Voltage: 80-105 Volts
Cap Type: B22d-3/31x30 Ni plated brass + vitrite
Bulb Finish: Clear Soda-lime glass
Bulb Type: ST-54 ST-17 in eighths/inch
Overall Length: 120 mm 4¾ inches
Light Centre Length: 90 mm 3½ inches
Arc Length 11 mm 0.43 inches
Electrodes: Backwound thoriated Double carbonate emitter
Inner / Outer Atmosphere: Inner: Ar | Hg (12 atm.) Outer: Ar-N2 0.5 bar
Luminous Flux: 1,360lm(100hrs)  1000lm(750hrs)    800lm(1500hrs)
Luminous Efficacy: 34lm/W (100hrs)  25lm/W (750hrs)  20lm/W(1500hrs)
Colour Temperature & CRI: CCT: 6000K CRI: Ra 16
Chromaticity Co-ordinates: CCx: 0.315 CCx: 0.380
Burning Position: Vertical cap down
Rated Lifetime: 1,500 hours (to 50% survival)
Warm-up / Re-strike Time: 5 minutes 5 minutes
Factory: Rugby England
Date of Manufacture: June 1947 Date Code: 66
Original / Present Value: Unknown Unknown
References: 1) Improved Lighting for Mines, H.K. Bourne, Light & Lighting September 1940 pp.142-147
2) Discharge Lamps for Photography & Projection, H. K. Bourne, publ. Chapman & Hall, London, 1948.
3) Electric Discharge Lamps, H. Cotton, publ. Chapman & Hall, London, 1946.
4) Characteristics of Electric Discharge Lamps for Projection, H.K. Bourne, Journal of British Kinematograph Society, London, January 1941.
5) Research on the Production and Utilisation of Light, H. Warren, Transactions of the Illuminating Engineering Society, January 1939.